Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

曲面零件在拉深过程中内皱时刻及影响因素

进一步推导了曲面零件悬空区上的应力分布及临界失稳公式。然后通过计算机编程 ,求解了临界失稳方程 ,得到了拉深系数、相对锥顶半径、相对圆角半径、材料相对厚度与临界失稳时刻间的关系曲线 ,并对曲线变化的规律进行了分析。     

处理废弃轮胎的一种有效方法——轮胎加筋土结构

废胎占用大量空间 ,且会产生诸多环境问题 ,利用轮胎加筋建筑挡土墙或陡坡 (堤 )是解决该问题的一种有效方法。本文提供了一种加筋堤的设计方法 ,比较了不同加筋模式 ,并对该堤进行了环境及其它指标的评价 ,证明了其可行性。     

Rapid prenatal diagnosis of Patau's syndrome in a fetus with an abdominal wall defect by 72 hour culture of cells from amniotic fluid

A woman in the 32nd week of pregnancy was referred for investigation because of fetal abnormalities, including an abdominal wall defect, detected by ultrasonography. In view of the increased risk of chromosome abnormality, amniocentesis was performed to enable informed decisions about the management of the pregnancy and delivery to be taken. Cells from the liquor were inoculated into standard lymphocyte culture medium and incubated for 72 h. Slides with a high mitotic index and good quality metaphases, comparable to those from a blood culture, were obtained after harvesting. Cytogenetic analysis showed the karyotype to be 46,XY,—14,+t(13ql4q), which is consistent with Patau's syndrome. This technique appears to be an option for rapid karyotyping in cases of abdominal wall defect, where a chromosomal abnormality is suspected.     

H型超薄板防渗技术在卫生填埋场中的应用

上海某生活垃圾卫生填埋场运营过程中发生堤坝渗漏,对周围环境造成了污染。经比选采用H型超薄板防渗技术处理,防渗薄板墙深18m,墙厚100mm。竣工后经CSAMT法、现场开挖取样等方式检测,超薄板墙各项指标均满足要求。有效治理了渗滤液渗漏,提升了区域环境质量。     

应用照相法估算高架点源的污染物浓度

应用流体力学基本原理，导出了烟流扩散新模式，讨论了利用照相法估算烟流污染物浓度的方法及步骤，以高架点源烟流扩散为例，应用新模式结合照相法估算烟流污染物浓度，并与利用高斯模式计算的烟流污染物浓度进行比较，结果表明两者吻合较好．     

S-100 protein and neuron-specific enolase in amniotic fluid as markers of abdominal wall and neural tube defects in the fetus

The aim of this study was to determine whether there is increased leakage of neuron-specific enolase (NSE) and S-100 protein into amniotic fluid in pregnancies with neural tube defects, since both these proteins are produced by neural tissue, and to compare the value of these substances for detecting such defects with that of the more conventional techniques of alpha-fetoprotein (AFP) and acetylcholinesterase (AChE) gel electrophoresis. Amniotic samples from 25 mid-pregnancies (15–17 weeks' gestation) with neural tube defects (14 with open spina bifida and 11 with anencephaly) and from seven mid-pregnancies with abdominal wall defects were compared with a control material consisting of 80 amniotic fluid samples from 80 consecutive mid-pregnancy amniocenteses, with normal karyotypes and AFP concentrations. All of the above cases of abnormalities were primarily detected through increased AFP levels in the amniotic fluid. Amniotic fluid samples from 13 pregnancies with fetuses with autosomal chromosomal abnormalities and seven amniotic fluid samples contaminated with blood were also included in the investigation. It is concluded from the results that the conventional AFP assay combined with AChE gel electrophoresis is the best method for screening amniotic fluid for neural tube defects and defects of the abdominal wall. Neither NSE nor S-100 assay alone proved to be superior for the detection of these cases in mid-trimester amniotic fluid. The S-100 assay, however, could give additional information in cases where AChE gel electrophoresis is not decisive; for example, in samples contaminated with blood.     

旋轮形状对杯形件单道次拉深旋压成形的影响

对杯形件单道次拉深旋压成形过程进行了分析,重点讨论了具有两个圆弧工作面的旋轮形状对成形过程的影响.研究结果表明,不同的旋轮形状不仅改变了旋压力p的大小,并且由于其对厚度应变ε的分布影响较大而造成整个旋压过程变形特征的改变,从而导致在工件的不同部位产生破裂.     

填埋场垃圾堆体平面压实工程试验研究

原生垃圾密度很小，为提高填埋垃圾堆体密实度、延长填埋场使用寿命，对填埋垃圾进行压实处理很重要。本文通过现场工程试验对影咱填埋垃圾堆体平面压实效果的主要因素进行了系统研究。实验结果表明：为取得最佳的垃圾堆体平面压实效果，最佳垃圾摊铺厚度在0.5m—0.7m之间，最佳机械行程次数为3次，增加碾压次数有利于提高垃圾堆体密实度，垃圾最佳含水率在30％——50％之间。     

1420Al-Li合金特深模锻件偏心问题分析及对策

对 14 2 0Al Li合金特深模锻件在实际生产 (反挤压 )过程中所产生的偏心问题进行了分析 ,分析表明 ,在上下的方向上 ,润滑不均将使冲头产生弯曲变形和使挤压筒上抬 ,致使锻件产生明显的偏心 ;在左右方向上 ,冲头的轴线相对于挤压筒轴线左偏 ,是产生偏心的主要原因。文中还提出了纠偏的措施。